Magyar
Română
English
Furatbefogók munkadarabok rögzítéséhez
KOSMEK SWE Hole Clamp
High-power pneumatic hole clamp for hole-based Z-axis seating and pull-down clamping. It is designed to clear the machining area on five faces except the clamping face, and the built-in mechanical lock helps maintain clamping force even when air pressure is lost.
| Maximum operating pressure | 0.5 MPa |
| Allowable offset (floating clearance of expanding area) | ±0.5 mm |
| Full stroke | 4.2 mm |
| Workpiece pulling stroke | 1.0 mm |
| Workpiece lifting stroke | 0.2 mm |
| Operating temperature | 0 ~ 70 °C |
| Usable fluid | Dry Air |
| Workpiece lifting amount when released | 0.2 mm |
| Model | Clamping force | Recommended air blow pressure | Workpiece lifting force | Cylinder capacity, release side | Cylinder capacity, lock side | Workpiece hole diameter |
|---|---|---|---|---|---|---|
| SWE1000 | Up to 1.5 kN at 0.5 MPa kN | 0.4 ~ 0.5 MPa | 0.09 kN | 18.6 cm3 | 17.6 cm3 | 6 ~ 9 mm |
| SWE2000 | Up to 2.2 kN at 0.5 MPa kN | 0.2 ~ 0.3 MPa | 0.15 kN | 25.5 cm3 | 24.2 cm3 | 9 ~ 13 mm |
KOSMEK SFC Hole Clamp
Hydraulic offset hole clamp for hole-based workholding, designed to avoid interference with workpieces, fixtures and tools. It uses a double-action hydraulic structure with built-in seating confirmation and is intended for stable clamping in 5-face machining applications.
| Workpiece lifting option | 0.2 mm [SFC family with lifting option] |
KOSMEK SFB Hole Clamp
Hydraulic double-acting hole clamp for gripping a workpiece hole and pulling it down onto the seating surface. It is designed to reduce interference around the workpiece and support compact, efficient 5-face machining.
KOSMEK SFG Hole Clamp
Single-action hydraulic hole clamp that grips the workpiece hole and pulls the part down onto the seating surface for Z-axis clamping. The design supports five-face machining with zero interference at the clamping face and uses spring release to reduce piping needs.
