Magyar
Română
English
Furatbefogók
Szűrés és keresés
Szűrés és keresés
Szűkítsd a termékek listáját
Furatbefogók
KOSMEK KSH Hole Clamp
Smart Series pneumatic hole clamp for holding a workpiece by its hole. Standard KSH grips the hole without pulling; KSH-P adds a pulling function to draw the workpiece onto the seating surface. The clamp is spring-locked and released by external force, with selectable hole-code sizes and D/C/M function variants.
Model
KSH0050
Product type
Pneumatic hole clamp
Action description
Gripper expands and clamps in the workpiece hole
Accessible faces
5 faces
| Release mechanism | External force |
| Locking mechanism | Spring |
| Workpiece hole code range | 060 to 100 |
| Workpiece hole diameter | 6 to 10 mm |
| Stroke | 2.5 mm |
| Gripping force | 50 N |
| Repeatability | 0.03 mm |
| Allowable offset of expanding area | ±0.2 mm |
| Releasing force | 60 to 200 N |
| Operating temperature range | 0 to 70 °C |
| Grease | Low-dust Grease for Clean Environments : AFF manufactured by THK |
| Weight | About 55 g |
| Hardness limit for pulling function | HB250 or less |
| Clamping force, no serration | 10 N |
| Clamping force, with serration | 45 N |
| Repeatability for pulling function | 0.03 mm |
| Over stroke | 0.8 mm |
| Full stroke | 3.0 mm |
| Workpiece pulling stroke | 0.5 mm |
| Releasing force for pulling function | 160 to 200 N |
| Mounting bolt size | M3×0.5 |
| Tightening torque | 1.3 N·m |
