36 30 659 92 06
0
KOSMEK KSH Hole Clamp

KOSMEK KSH Hole Clamp

Smart Series｜Hole Clamp

Cikkszám: KSH
Smart Series pneumatic hole clamp for holding a workpiece by its hole. Standard KSH grips the hole without pulling; KSH-P adds a pulling function to draw the workpiece onto the seating surface. The clamp is spring-locked and released by external force, with selectable hole-code sizes and D/C/M function variants.

A szállítási időt az ajánlatban pontosítjuk.

Model
KSH0050
Product type
Pneumatic hole clamp
Action description
Gripper expands and clamps in the workpiece hole
Accessible faces
5 faces
Release mechanism External force
Locking mechanism Spring
Workpiece hole code range 060 to 100
Workpiece hole diameter 6 to 10 mm
Stroke 2.5 mm
Gripping force 50 N
Repeatability 0.03 mm
Allowable offset of expanding area ±0.2 mm
Releasing force 60 to 200 N
Operating temperature range 0 to 70 °C
Grease Low-dust Grease for Clean Environments : AFF manufactured by THK
Weight About 55 g
Hardness limit for pulling function HB250 or less
Clamping force, no serration 10 N
Clamping force, with serration 45 N
Repeatability for pulling function 0.03 mm
Over stroke 0.8 mm
Full stroke 3.0 mm
Workpiece pulling stroke 0.5 mm
Releasing force for pulling function 160 to 200 N
Mounting bolt size M3×0.5
Tightening torque 1.3 N·m

KSH is a pneumatic hole clamp in the Smart Series. It expands a gripper into the workpiece hole, then locks by spring force when external releasing force is removed. The standard version holds the workpiece hole, and the P option adds a pulling function that seats the workpiece against the reference surface.

The family is designed for access on five faces and uses low-dust grease for clean environments. Function selection covers datum locating, one-direction locating, or floating expanding area, depending on the workpiece hole code.

Recommendation: KSS, KSL, KSA

KOSMEK KSH Hole Clamp

KOSMEK KSH Hole Clamp

KOSMEK KSH Hole Clamp