Magyar
Română
English
Automatizálási és robottechnikai eszközök
Szűrés és keresés
Szűrés és keresés
Szűkítsd a termékek listáját
KOSMEK KSL Location Clamp
Smart Series location clamp with single-action release by external force and spring lock. It locates and clamps simultaneously for quicker pallet changeover and setup, with documented locating repeatability of 0.010 mm.
| Releasing force, minimum | 60 N |
| Releasing force, maximum | 200 N |
| Lift up stroke | 0.4 mm |
| Allowable offset when a pallet is set | 0.8 mm |
| Max. loading weight | 5 kg |
| Clamping force | About 50 N |
| Operating temperature | 0 ~ 120 ℃ |
| Grease | Low-dust Grease for Clean Environments : AFF manufactured by THK |
| Clamp weight | About 35 g |
| Block weight | About 14 g |
| Connected state dimension when locked | 12.5 mm |
| Connected state dimension when released | 12.9 mm |
| Mounting bolt size | M3×0.5 |
| Tightening torque | 1.3 N·m |
| Allowed dimension in vertical position | 13.4 mm |
KOSMEK KSH Hole Clamp
Smart Series pneumatic hole clamp for holding a workpiece by its hole. Standard KSH grips the hole without pulling; KSH-P adds a pulling function to draw the workpiece onto the seating surface. The clamp is spring-locked and released by external force, with selectable hole-code sizes and D/C/M function variants.
| Release mechanism | External force |
| Locking mechanism | Spring |
| Workpiece hole code range | 060 to 100 |
| Workpiece hole diameter | 6 to 10 mm |
| Stroke | 2.5 mm |
| Gripping force | 50 N |
| Repeatability | 0.03 mm |
| Allowable offset of expanding area | ±0.2 mm |
| Releasing force | 60 to 200 N |
| Operating temperature range | 0 to 70 °C |
| Grease | Low-dust Grease for Clean Environments : AFF manufactured by THK |
| Weight | About 55 g |
| Hardness limit for pulling function | HB250 or less |
| Clamping force, no serration | 10 N |
| Clamping force, with serration | 45 N |
| Repeatability for pulling function | 0.03 mm |
| Over stroke | 0.8 mm |
| Full stroke | 3.0 mm |
| Workpiece pulling stroke | 0.5 mm |
| Releasing force for pulling function | 160 to 200 N |
| Mounting bolt size | M3×0.5 |
| Tightening torque | 1.3 N·m |
KOSMEK KSA Ball Wedge Cylinder
Smart Series ball wedge cylinder for small pallet transferring. It uses a spring-locked mechanical ball wedge action to hold pallets or plates and release with external force.
| Releasing force, maximum | About 30 N |
| Stroke | 1.8 mm |
| Operating temperature | 0 ~ 120 ℃ |
| Grease | Low-dust Grease for Clean Environments : AFF manufactured by THK |
| Weight | About 35 g |
| Releasing force | 10 ~ 30 N |
| Workpiece hole diameter when locked | 0.1 ~ 0.2 mm |
| Attachment model | WKAZ060-B |
| Attachment material | Martensitic Stainless Steel (HRc29 ~ 33) |
| Attachment weight | 5 g |
| Mounting bolt size | M3×0.5 |
| Tightening torque | 1.3 N·m |
KOSMEK KSS Swing Clamp
Smart Series single-action swing clamp for workpiece clamping. It uses a built-in spring return, delivers a repeatable swing angle position, and is intended for compact clamping applications with low-dust grease for clean environments.
| Swing stroke | 5.2 mm |
| Vertical stroke | 5 mm |
| 90° swing angle accuracy | 90°±3° |
| Swing completion position repeatability | ±1° |
| Spring force at release | 85.9 N |
| Spring force at start of vertical stroke | 68.7 N |
| Spring force at middle of vertical stroke | 61.6 N |
| Spring force at completion of vertical stroke | 54.4 N |
| Releasing force minimum | 120 N |
| Releasing force maximum | 200 N |
| Operating temperature | 0 ~ 120 ℃ |
| Grease | Low-dust Grease for Clean Environments : AFF manufactured by THK |
| Weight | About 95 g |
