Magyar
Română
English
JBC RMSD System
Rework with DT530
RMSD is not only the fastest but also the safest option for soldering and rework, including the use of hot air.
A szállítási időt az ajánlatban pontosítjuk.
Nominal power
700 W
Selectable temperature
150 to 450 °C / 300 to 840 °F
Air flow regulation
5 to 50 SLPM
| Vacuum | 30% / 228 mmHg / 9 inHg |
| Profiles | 25 (up to 10 steps for each), 1 preset profile |
| Type K TC connector | 1 for Control & Protection |
| ESD safe | Meet ANSI / ESD S20.20-2021 |
| Equipotential bonding | Connection to EPA |
| USB-A | Firmware update , Graphics and profiles |
| USB-B | PC communications |
| RJ12 Connector | Remote control or FAE Fume Extractor connection |
| Pedal connector | Tool control |
| Peak power | 150 W per tool |
| Selectable temperature | 90 to 450 ºC / 190 to 840 ºF |
| Temperature accuracy | ±3% |
| ESD safe | Meet ANSI/ESD S20.20-2021 |
| Equipotential bonding | Optional connection to EPA |
| Tip-to-ground resistance | <2 ohms |
| Tip-to-ground voltage | <2 mV RMS |
| USB-A | Firmware update , Graphics and profiles |
| USB-B | PC communications |
| FAE / Robot connector | Remote control or FAE Fume Extractor connection |
| Vacuum | 85 % / 640 mmHg / 25.4 inHg |
| Flow rate | 35 SLPM |
| ESD safe | Meet ANSI/ESD S20.20-2021 |
| Control Unit | 232 x 148 x 295 mm / 13.85 kg. , 9.13 x 5.83 x 11.61 in / 30.53 lb. |
| Package | 615 x 368 x 637 mm / 19.83 kg. , 24.21 x 14.49 x 25.08 in / 43.71 lb. |
Achieve high-quality soldering with JBC Most Efficient Soldering System, while Intelligent Heat Management helps extend tip life and reduce energy consumption. Includes: • DDE 2-Tool Control Unit manages up to two tools simultaneously and is fully compatible with 10 different JBC Tools, delivering up to 150 W per tool. • RMSD works simultaneously with DT530 Angled Desoldering Iron, T245 General Purpose Handle and JTT Heater Hose Set. • MSE Electric Desoldering Module provides exceptional suction power, reaching up to 85% vacuum, ensuring precise and efficient solder removal. • JTSE Hot Air Station controls the rework task using temperature and airflow profiles.
