Magyar
Română
English
JBC DDSE Station
2-Tool Rework
DDSE Station equipped with MSE Module ensures efficient and precise solder removal thanks to its powerful suction system. It is ideal for SMDs, high-power applications, desoldering through-hole components and removing excess solder after SMD removal.
A szállítási időt az ajánlatban pontosítjuk.
Nominal power
370W
Peak power
150 W per tool
Selectable temperature
90 to 450 ºC / 190 to 840 ºF
Idle temp. stability (still air)
±1.5ºC / ±3ºF / Meets and exceeds IPC J-STD-001F
| Vacuum | 85 % / 640 mmHg / 25.4 inHg |
| Flow rate | 35 SLPM |
| Temperature accuracy | ±3% (using reference cartridge) |
| Temp. adjustment | ±50ºC / ±90ºF Through station menu setting |
| Tip-to-ground resistance | <2 ohms |
| Tip-to-ground voltage | <2 mV RMS |
| USB-A | Firmware update , Graphics and profiles |
| USB-B | PC communications |
| FAE / Robot connector | Remote control or FAE Fume Extractor connection |
| ESD safe | Meet ANSI/ESD S20.20-2021 |
| Control Unit | 232 x 148 x 120 mm / 8.40 kg. , 9.13 x 5.83 x 4.72 in / 18.52 lb. |
| Package | 425 x 360 x 433 mm / 12.92 kg. , 16.73 x 14.17 x 17.05 in / 28.48 lb. |
It provides the highest rework quality thanks to JBC Most Efficient Soldering System, while Intelligent Heat Management helps extend tip life and reduce energy consumption. Includes: • DDE 2-Tool Control Unit managing up to two tools simultaneously and fully compatible with 10 different JBC Tools, delivering up to 150 W per tool. • T245 General Purpose Handle which works with C245 Cartridge Range. • DR560 Desoldering Iron which works with C560 Tip Range. • MSE Electric Desoldering Module offering exceptional suction power for a complete desoldering process.
