Magyar
Română
English
JBC DDSD Station
2-Tool Rework with DT530
DDSD Station provides a versatile solution for SMD and high-power applications, excelling in desoldering through-hole components and removing excess solder after SMD removal. It is ideal for delivering clean, precise results across various soldering tasks.
A szállítási időt az ajánlatban pontosítjuk.
Nominal power
370W
Peak power
150 W per tool
Selectable temperature
90 to 450 ºC / 190 to 840 ºF
Idle temp. stability (still air)
±1.5ºC / ±3ºF / Meets and exceeds IPC J-STD-001F
| Vacuum | 85 % / 640 mmHg / 25.4 inHg |
| Flow rate | 35 SLPM |
| Temperature accuracy | ±3% (using reference cartridge) |
| Temp. adjustment | ±50ºC / ±90ºF Through station menu setting |
| Tip-to-ground resistance | <2 ohms |
| Tip-to-ground voltage | <2 mV RMS |
| USB-A | Firmware update , Graphics and profiles |
| USB-B | PC communications |
| FAE / Robot connector | Remote control or FAE Fume Extractor connection |
| ESD safe | Meet ANSI/ESD S20.20-2021 |
| Control Unit | 232 x 148 x 120 mm / 8.96 kg. , 9.13 x 5.83 x 4.72 in / 19.74 lb. |
| Package | 495 x 415 x 395 mm / 13.12 kg. , 19.49 x 16.34 x 15.55 in / 28.92 lb. |
It provides the best rework quality thanks to JBC Most Efficient Soldering System, with Intelligent Heat Management to extend tip life and reduce energy consumption. Includes: • DDE 2-Tool Control Unit manages up to two tools simultaneously and is fully compatible with 10 different JBC Tools, delivering up to 150 W per tool. • T245 General Purpose Handle and DT530 Angled Desoldering Iron. • T245 works with C245 Cartridge Range and DT530 with D530 Tip Range. • MSE Electric Desoldering Module provides exceptional suction power, reaching up to 85% vacuum, ensuring precise and efficient solder removal.
