36 30 659 92 06
0
JBC PHXLEK Preheater Set

JBC PHXLEK Preheater Set

for PCBs up to 51 x 61 cm / 20 x 24"

Cikkszám: MT-868
This is a complete system of Preheater and PCB support for preheating big-sized PCBAs such as communications boards, airplanes, etc. and ideal for repetitive soldering jobs.

A szállítási időt az ajánlatban pontosítjuk.

Peak power
5400 W
Selectable temperature
50 to 250 ºC / 120 to 482 ºF
Heating area
255 x 203 mm / 10.04 x 8 in - 1 zone, 510 x 610 mm / 20 x 24 in - 6 zones
Type K TC connector
8 for Control & Protection
Profiles 22 (up to 16 steps for each)
Set temperature profiles 3 profiles (2,3 or 4 steps)
Maximum work time 50 min or indefinite
ESD safe Meet ANSI/ESD S20.20-2021
USB-A Firmware update, Graphics and profiles
USB-B PC communications
Robot connector Remote control
Aux. connector Console connection
Pedal connector Connect a pedal (ref. P-005) to control the heater
PreHeater Unit 790 x 664 x 42 mm / 23.00 kg., 31.10 x 26.14 x 1.65 in / 50.71 lb.
Package 1200 x 800 x 374 mm / 71.00 kg., 47.24 x 31.50 x 14.72 in / 156.53 lb.

Indispensable for avoiding thermal shock on multilayer PCBs while reworking. This is a complete system of Preheater and PCB support for preheating big-sized PCBAs such as communications boards, airplanes, etc. and ideal for repetitive soldering jobs. It features a heating area of 510 x 610 mm / 20.07 x 24 in. with 6 independent work zones (255 x 203 mm / 10.04 x 8 in) to be switched on/off. Matchless reliability in temperature accuracy and control of the PCBA so that no component is damaged. It features three work modes: Power Mode allows working at a fixed power level with the option of using protection thermocouple. Temperature Mode keeps the PCBA at a selected temperature, using the regulation thermocouple and, optionally, protection thermocouples. Profile Mode allows control of the heating rate of the PCBA by the use of a control and protection thermocouple, without exceeding the recommended limit levels in each application. It features 25 profiles of temperature. Up to eight thermocouples can be connected to which enables the operator to work in any of the three work modes. PHXLS Support is perfectly adaptable to any type of PCBs by means of its many adjustable components and its 3 adjustable clearance positions 28, 38 or 48 mm / 1.1, 1.5 or 1.9 in.