36 30 659 92 06
0
JBC PHSE Preheater 13 x 13 cm

JBC PHSE Preheater 13 x 13 cm

for PCBs up to 13 x 13 cm / 5 x 5"

Cikkszám: MT-861
It is a complete solution to rework small / medium PCBAs, such as the once commonly used in electronic industries. It features a heating area of 130 x 135 mm / 5 x 5 in. and four TC connections.

A szállítási időt az ajánlatban pontosítjuk.

Peak power
800 W
Selectable temperature
50 to 250 ºC / 120 to 482 ºF
Heating area
65 x 135 mm / 2.6 x 5.3 in - 1 zone, 130 x 135 mm / 5.1 x 5.3 in - 2 zones
Type K TC connector
4 for Control & Protection
Profiles 22 (up to 16 steps for each)
Set temperature profiles 3 profiles (2, 3 or 4 steps)
Maximum work time 50 min or indefinite
ESD safe Meet ANSI/ESD S20.20-2021
USB-A Firmware update, Graphics and profiles
USB-B PC communications
Robot connector Remote control
Aux. connector Console connection
Pedal connector Connect a pedal (ref. P-005) to control the heater
PreHeater Unit 195 x 288 x 42 mm / 2.60 kg. , 7.68 x 11.34 x 1.65 in / 5.73 lb.
Package 368 x 368 x 125 mm / 3.58 kg., 14.49 x 14.49 x 4.92 in / 7.89 lb.

Indispensable for avoiding thermal shock on multilayer PCBs while reworking. It is a complete solution to rework small / medium PCBAs, such as the once commonly used in electronic industries. It features a heating area of 130 x 135 mm / 5 x 5 in. and four TC connections. Matchless reliability in temperature accuracy and control of the PCBA so that no component is damaged. It features three work modes: Power Mode allows working at a fixed power level with the option of using protection thermocouple. Temperature Mode keeps the PCBA at a selected temperature, using the regulation thermocouple and, optionally, protection thermocouples. Profile Mode allows control of the heating rate of the PCBA by the use of a control and protection thermocouple, without exceeding the recommended limit levels in each application. It features 25 profiles of temperature. Up to four thermocouples can be connected in any of the three work modes.