36 30 659 92 06
0
JBC PHNEK Preheater Set 11 x 7 cm

JBC PHNEK Preheater Set 11 x 7 cm

for PCBs up to 11 x 7 cm / 4 x 3"

Cikkszám: MT-860
It is a complete solution to rework small PCBAs, such as the ones commonly used in smartphones. It features a heating area of 108 x 70 mm / 4 x 3 in.

A szállítási időt az ajánlatban pontosítjuk.

Peak power
300 W
Selectable temperature
50 to 250 ºC / 120 to 482 ºF
Heating area
108 x 70 mm / 4.25 x 2.75 in
Type K TC connector
2 for Control & Protection
Profiles 22 (up to 16 steps for each)
Set temperature profiles 3 profiles (2, 3 or 4 steps)
Maximum work time 50 min or indefinite
ESD safe Meet ANSI/ESD S20.20-2021
USB-A Firmware update, Graphics and profiles
USB-B PC communications
Robot connector Remote control
Aux. connector Console connection
Pedal connector Connect a pedal (ref. P-005) to control the heater
Weight and dimensions PreHeater Unit 179 x 165 x 42 mm / 1.20 kg., 7.05 x 6.50 x 1.65 in / 2.65 lb.
Package 280 x 280 x 164 mm / 2.30 kg., 11.02 x 11.02 x 6.46 in / 5.07 lb.

Indispensable for avoiding thermal shock on multilayer PCBs while reworking. It is a complete solution to rework small PCBAs, such as the ones commonly used in smartphones. It features a heating area of 108 x 70 mm / 4 x 3 in. Matchless reliability in temperature accuracy and control of the PCBA so that no component is damaged. It features three work modes: Power Mode allows working at a fixed power level with the option of using protection thermocouple. Temperature Mode keeps the PCBA at a selected temperature, using the regulation thermocouple and, optionally, protection thermocouples. Profile Mode allows control of the heating rate of the PCBA by the use of a control and protection thermocouple, without exceeding the recommended limit levels in each application. It features 25 profiles of temperature. Two thermocouple can be connected in any of the three work modes.